Moon Air provides fast, reliable air conditioning, heating, and electrical services to the residents of Newark, MD and the surrounding areas!

We pride ourselves on a high standard of customer service. Read our reviews and find out why your neighbors consider us to be their preferred HVAC company and electrician in Newark, MD.

Local Reviews
for Newark, MD

Moon Air Inc. Rated 5.0 out of 5 stars based on 4 customer reviews


Map of Newark, MD

Awesome company, Awesome employees




Review of Moon Air Inc.

This company and its employees are without a doubt the best that we have been associated with. Very polite, informative, and helpful. In my opinion that it a quality that it hard to find . Thank you


Map of Newark, MD

GREAT SERVICE




Review of Moon Air Inc.

VERY INFORMATABLE ABOUT WHAT HE WAS DOING, AS WELL AS WHAT IT WAS GOING TO COST. HE ALSO CONVINCED US THAT OUR EQUIPMENT WAS TOO OLD TO BE PUTTING A LOT OF MONEY INTO SO WE ARE PURCHASING NEW EQUIPMENT.


Map of Newark, MD

Clay was very knowledgeable about what he does,he found a very rare problem to my flame sensor it was bad and didn't cost me a bunch of money




Review of Moon Air Inc.


Map of Newark, MD

Arrived on time, covered shoes, worked quickly and efficienty




Review of Moon Air Inc.


Gerald T.

Gerald T.

Service call for no cooling. 14-year-old Nordyne furnace and condenser. Upon arrival the air circulation system worked but the condenser did not. Found the start winding wire had burned apart and the voltage enhancer failed. After repairing the wire and replacing the voltage enhancer, the condenser started and the refrigerant pumping system's run amps were 8.8 (RLA is 13), the start amps were 5.2, and the air exhaust system's amps were .6 (FLA is 1.1). The system began properly cooling.

Near W Tulip Ln, Newark, MD 19713
Gerald T.

Gerald T.

Service call for no cooling. 14-year-old Nordyne furnace and condenser. Upon arrival the air circulation system worked but the condenser did not. Found the start winding wire had burned apart and the voltage enhancer failed. After repairing the wire and replacing the voltage enhancer, the condenser started and the refrigerant pumping system's run amps were 8.8 (RLA is 13), the start amps were 5.2, and the air exhaust system's amps were .6 (FLA is 1.1). The system began properly cooling.

Near W Tulip Ln, Newark, MD 19713
John A.

John A.

New heating and air conditioning system

Near Pine Dr, Newark, MD 19713
Clay K.

Clay K.

A/C repair and service

Near Pine Dr, Newark, MD 19713
Clay K.

Clay K.

Gas furnace tune up

Near Gypsum Dr, Newark, MD 19713
Clay K.

Clay K.

Gas Furnace Repair

Near Gypsum Dr, Newark, MD 19713